Manufactured by 

RoadSaver II Specifications - Construction

Frame: Stress relieved Structural Ship Channel used throughout.

Tanks: 1/4" A 572 High Tensile Steel formed plate construction: Front, Sides, Bottom sections. Top-Rear Plate section attached to aggregate hopper are formed 3/16" ASTM A 572 High Tensile Steel. All corner seams are overlapped and welded inside and out. Structural channel stress-relieved tank bracing is also installed to reinforce the tanks interior and exterior weld joints.

Hopper: 3/16" ASTM A 572 High Tensile Abrasion Resistant Steel, with the hopper plating formed with the steel grain aligned with the flow of aggregate to the conveyor to reduce wear. There is a removable flush mount access panel on the hopper wall for easy access to the back side  of the engine for maintenance

Aggregate Vibrator: A hydraulically driven aggregate vibrator beam is suspended in the hopper to insure constant flow of aggregate to the mixer, regardless of moisture content. The beam is constructed of abrasion resistant ASTM A572 High Tensile Steel.

Aggregate Hopper, Vibrator Beam, and Engine Access Panel

Pugmill: 1/4" ASTM A 572 High Tensile Abrasion Resistant Steel construction.

Contents © 2000 California Pavement Maintenance Co, Inc. All rights reserved

Use of this site indicates you accept the Term of Use

Questions or comments about our web page should be directed to the webmaster